How Often Should Commercial Roofs Be Inspected?

Twice a year without fail is the standard general rule in the roofing industry when it comes to inspecting your commercial-quality roof. It is best to examine it in spring and autumn, before entering each extreme season. An annual roof inspection can result in leaks and damage in 364 days, so it is important to be proactive in order to prevent any costly repairs. Flat roofs present enormous challenges in locating leaks by tracking them from inside the building.

This is because a leak outside can allow water to enter and then travel laterally before revealing itself in roof tiles or sheets of rock in the space occupied below. A long-neglected leak can pass through your property before it falls below the roof covering, weakening its structure and causing mold and mildew problems. Flat roofs require frequent inspections because they are more susceptible to water damage and wear than sloped roofs. You should usually inspect a flat roof at least twice a year (spring and autumn).

Sloped roofs can get away with just an annual inspection. Regular inspections, cleanings, and repairs are considered general preventive maintenance. Annual roof inspections are expected, but many facilities will need roof maintenance more than once a year. Inspections detect problems when they are small, and repairs are often easier and less expensive.

Cleaning removes dirt that could accelerate roof deterioration, harbor pests, and clog drain lines. Routine maintenance and repairs are necessary to keep the roof working as intended. The best thing to do is to inspect the roof twice a year, in spring and autumn. This way, you can prepare for a change in weather patterns that can result in leaks and damage to your building.

Roofing guidelines suggest that you inspect your roof twice a year at least. You should inspect your roof when the summer season ends and again when the winter season ends. Some commercial property owners prefer to have their roofs inspected every month (especially after extreme weather events have occurred). It is recommended to inspect the roof after storms, heavy rains or strong winds.

Ideally, inspections should be carried out twice a year at regular intervals. With this in mind, it's also good practice to inspect the roof if your area experiences a severe weather event. Commercial roofs should be inspected every year before summer and after the heat wave has passed. The first test involves finding problems that could get worse.

The second is to discover and repair any damage that occurred during the summer. With more than 70 years of combined experience in the commercial roofing industry, TEMA is your roofing partner for the life of your business. The first roof inspection of the year should take place in late spring, after the spring storms have passed. If contamination is a major concern due to food processing or sterile manufacturing, keeping roofs vigilant is imperative.

If you have a massive leak (or if the roof has been blown off), you should request an emergency roof repair from your roofing contractor. In addition, if a major roof project has been carried out, an inspection will determine if the roof was damaged by workers and their equipment. Twice-yearly inspections by a trusted local roofing contractor preserve your flat roof and protect your investment. Commercial roof ventilation can prevent problems such as moisture accumulation and water damage and minimize the amount you spend on energy bills.

In addition, an inspector will look at any small cracks or blisters, along with any signs of structural corrosion or potential points of failure in the roof itself. As the problem worsens, you'll risk serious water damage (which could lead to the need for major roof repairs, replace a business roof, or even a potential roof collapse). A Sugar Land residential roofing technician can provide you with an accurate assessment of the condition of your roof. If you perform regular maintenance on rooftop equipment, it's important to inspect the roof frequently to detect any damage caused by falling tools and crushed insulation, as well as any outdated parts, rags, bottles and screws that have been left behind.

A roof asset management program collects all of your commercial roof data in a convenient location that can be accessed from any computer or device you choose.

Darrin Kleekamp
Darrin Kleekamp

Lifelong explorer. Total internet lover. Music expert. Devoted travel aficionado. Amateur beer specialist.

Leave Reply

Required fields are marked *